 |
 |
 |
 |
 |
 |
Breakout
Barriers
Secondary
Tank for
Beauty Shops System
The Eliminator
Miller Adhesive
Riser Pipes
Underground Liners
Fully Stocked Septic
Supply Yard
The
Universal Liner
• Introduction
• Features
• Retro-Fit
• Cast-in-Place
• Product Specifications
• Photos
• Material Testing
Monterey,
Massachusetts
May
24, 2000 - This was a new installation of a septic tank at a lakefront
property. We used a 2 piece,
Exterior Liner System, a tank liner and a lid liner retrofitted onto
a 200 gal. tight tank to completely
line the outside of this septic tight tank
As we lifted
up the bottom section of the new tank with chains, the liner was installed
on the exterior
bottom half
of the tank, folding the excess liner into the tank, holding it in place
until it was set in place.
The Retro-Fitted
bottom piece is now placed on top of a sheet of 40 mil plastic (in the
hole), protecting the
liner from the gravel and sand. We then moved the excess liner out of
the way for preparation of setting
the top half in place.
We placed the top half of the tank on the bottom half.
We then fit the liner over the top half of the tank, and fastened the pipe through the boot with a hose clamp.
We then placed the lid liner onto the top of
the tank, fastening the lid liner to the tank liner and both to
the tank
with our Installation Kit.
Completing
the installation, guaranteeing an absolute watertight septic tank, protecting
the groundwater
getting in and raw sewage getting out.
Products Services Downloads Contact Us Links
Copyright © 2000-04 Miller Environmental Products, Inc. All images are property of Miller Environmental Products, Inc. and may not be reproduced without permission. Please call 508-378-3800 for more information. Questions or comments about this site, contact the Webmaster
