 |
 |
 |
 |
 |
 |
Breakout
Barriers
Secondary
Tank for
Beauty Shops System
The Eliminator
Miller Adhesive
Riser Pipes
Underground Liners
Fully Stocked Septic
Supply Yard
The
Universal Liner
• Introduction
• Features
• Retro-Fit
• Cast-in-Place
• Product Specifications
• Photos
• Material Testing
Miller Adhesive 3000
| Appearance: | Smooth, gray gumlike material layered between clear and white film release liners. |
| Application: | Clean surface. Remove dust, dirt and moisture. Peel off release liner. MUST BE APPLIED EXACTLY IN PLACE FIRST TIME, trying to remove may damage tape and material. DO NOT STRECH. Press down firmly starting at center and working toward outside edge of tape, removing bubbles. Some wrinkling should not affect seal or performance. Edges must have no openings, tunnels or fishmouths. |
| Bonding Time: | Immediate, watertight aggressive grip. Full bond within 24 hours |
| Adhesive: | 33 mil gray elastomeric modified butyl rubber. (proprietary formula) |
| Packaging: | 3" width x 50’ lengths, 16 per case |
| TEMPERATURES | |
| Aplication: | 30 to 100 degrees F |
| Operating limits: | 20 to 180 degrees F |
| LOW TEMPERATURE | |
| Flexibility; | Passes, no cracking. |
| Tensil Strength: | 445 psi (with 60% elongation) |
| Peel strength: | 10 lbs. per linear inch. |
| Water resistance: | Excellent. Surface must be clean and dry before application |
| U.V. Resistance: | Avoid direct UV exposure |
| Shelf Life: | 18 months to 2 years |
Please Contact us for more information.
Products Services Downloads Contact Us Links
Copyright © 2000-04 Miller Environmental Products, Inc. All images are property of Miller Environmental Products, Inc. and may not be reproduced without permission. Please call 508-378-3800 for more information. Questions or comments about this site, contact the Webmaster
