Breakout Barriers

Secondary Tank for
Beauty Shops System

The Eliminator

Miller Adhesive

Riser Pipes

Underground Liners

Fully Stocked Septic
Supply Yard

The Universal Liner
   • Introduction
   • Features
   • Retro-Fit
   • Cast-in-Place
   • Product Specifications
   • Photos
   • Material Testing

Visit Our Factory

Past Projects

Typical Physical Property Values of our Chemical Resistant 40mil
Polyethylene Breakout Barrier Material
Download a print friendly PDF of this Spec Sheet

Properties Test Method Minimum Roll Averages Typical Roll Averages
Thickness mils (mm) ASTM D 1583 37 (0.94) 40 (1.02)
Density lb/ft3 ASTM D792 or
ASTM D1505		   57.7 (.925)
Minimum Tensile
lb/in, width
84 (147)
(N/cm width)		 ASTM D638
1. Tensile strength at yield
2. % elongation at yield
3. Tensile strength at break
4. % elongation at break
5. Modulus @ 100% elongation


80 (140)
13
175 (314)
650


84 (147)
13
175 (314)
700
68 (119)
Hydrostatic Resistance
psi (kPa)		 ASTM D751 230 (1586) 250 (1724)
Puncture Resistance lbf (N) FTMS 101 C - Method 2065 61 (271) 65 (289)
Tear Resistance lbf (N) ASTM D1004 24 (107) 26 (116)
Volatile Loss - Method A ASTM 1203   < 1%

Resistance to Soil Burial  (% change maximum in
original value)

 ASTM G22
1. Tensile strength at yield
2. Tensile strength at break
3. Elongation at yield
4. Elongation at break
5. Modulus of elasticity

 


- 4%
Low Temp, Impact Failure Temp F (C) ASTM D746   < .70
(< .94)
Dimensional Stability % Change ASTM D1204   < 2
Environmental Stress Crack Resistance
Hours to Failure

ASTM D5397
Method A

   > 400
Carbon Black % ASTM D1803 2.5 2.75
WVTR gH2O/100 in2/24 hrs
(gH2O/m2/24 hrs)		 ASTM E96
Method A 73o F, 50% RH		   .016
(.018)

Perms graines/ft2/hr/in.Hg
(grams/m2/day/mm Hg

 ASTM E96
Method A 73o F, 50% RH		   .021
.026)
Factory Seam Requirements
Bonded Seam Strength lbf/in. width (N/cm width) ASTM D4437 72
(126)		 80
(140)

Seam Peal Adhesion lbf/in.
width (N/cm width)

 ASTM D4437

56
(98)

 62
(109)
Nominal Weight/Thousand Square Feet: Model #MBE40M (Miller Breakout Barrier) - 200 lbs
Note: To the best of our knowledge, these are typical property values and are intended as guides only, not as specification limits. Miller Environmental Products, Inc. makes no warranties as to the fitness for a specific use or merchantability of products referred to, no guarantee of satisfactory results from reliance upon contained information or recommendations and disclaims all liability for resulting loss or damage.

 

Products    Services    Downloads    Contact Us    Links

Copyright © 2000-04 Miller Environmental Products, Inc. All images are property of Miller Environmental Products, Inc. and may not be reproduced without permission. Please call 508-378-3800 for more information. Questions or comments about this site, contact the Webmaster