Download a print friendly PDF of this Spec Sheet
|
| Properties | Test Method | Minimum Roll Averages | Typical Roll Averages |
| Thickness mils (mm) | ASTM D 1583 | 37 (0.94) | 40 (1.02) |
| Density lb/ft3 | ASTM D792 or
ASTM D1505 | | 57.7 (.925) |
Minimum Tensile
lb/in, width
84 (147)
(N/cm width) | ASTM D638
1. Tensile strength at yield
2. % elongation at yield
3. Tensile strength at break
4. % elongation at break
5. Modulus @ 100% elongation |
80 (140)
13
175 (314)
650
|
84 (147)
13
175 (314)
700
68 (119)
|
Hydrostatic Resistance
psi (kPa) | ASTM D751 | 230 (1586) | 250 (1724) |
| Puncture Resistance lbf (N) | FTMS 101 C - Method 2065 | 61 (271) | 65 (289) |
| Tear Resistance lbf (N) | ASTM D1004 | 24 (107) | 26 (116) |
| Volatile Loss - Method A | ASTM 1203 | | < 1% |
Resistance to Soil Burial (% change maximum in
original value) | ASTM G22
1. Tensile strength at yield
2. Tensile strength at break
3. Elongation at yield
4. Elongation at break
5. Modulus of elasticity | |
- 4%
|
| Low Temp, Impact Failure Temp F (C) | ASTM D746 | | < .70
(< .94) |
| Dimensional Stability % Change | ASTM D1204 | | < 2 |
Environmental Stress Crack Resistance
Hours to Failure | ASTM D5397
Method A | | > 400 |
| Carbon Black % | ASTM D1803 | 2.5 | 2.75 |
WVTR gH2O/100 in2/24 hrs
(gH2O/m2/24 hrs) | ASTM E96
Method A 73o F, 50% RH | | .016
(.018) |
Perms graines/ft2/hr/in.Hg
(grams/m2/day/mm Hg | ASTM E96
Method A 73o F, 50% RH | | .021
.026) |
| Factory Seam Requirements |
| Bonded Seam Strength lbf/in. width (N/cm width) | ASTM D4437 | 72
(126) | 80
(140) |
Seam Peal Adhesion lbf/in.
width (N/cm width) | ASTM D4437 | 56
(98) | 62
(109) |
| Nominal Weight/Thousand Square Feet: Model #MBE40M (Miller Breakout Barrier) - 200 lbs |
| Note: To the best of our knowledge, these are typical property values and are intended as guides only, not as specification limits. Miller Environmental Products, Inc. makes no warranties as to the fitness for a specific use or merchantability of products referred to, no guarantee of satisfactory results from reliance upon contained information or recommendations and disclaims all liability for resulting loss or damage. |
